Get matched with licensed roofing contractors in your state. Full roof replacement, storm damage repair, hail damage inspection, and insurance claim help — compare quotes from local pros with no obligation.
Roof replacement is one of the most-bid-rigged home improvement categories — pricing variance between contractors on the same scope routinely exceeds 40%. The honest contractor with a solid crew and proper warranty isn't always the cheapest, but they're almost never the most expensive either. Get at least three written quotes, all on the same shingle line and same warranty tier, before signing. The Home Service Guide pre-vets contractors for licensing, insurance, manufacturer certification (GAF Master Elite, Owens Corning Platinum Preferred, etc.), and complaint history so the quotes you compare are actually comparable.
A proper roof replacement quote itemizes the shingle brand, color, and warranty tier; underlayment type (synthetic vs felt); ice and water shield coverage area; ridge and starter products; flashing replacement scope (chimneys, skylights, valleys, pipe boots); ventilation upgrades; decking inspection allowance for rotten wood replacement priced per board-foot; tear-off scope (one layer or two); dump fees and job-site protection; cleanup and magnet sweep; permit cost; and the workmanship warranty term separate from the manufacturer warranty. Vague quotes that just say 'install new shingles' invariably hide change orders later.
If your roof has visible storm or hail damage and the existing roof is less than 15 years old, you usually have a valid insurance claim that pays for most or all of the replacement. A reputable local roofer can do a free inspection, photograph hail strikes and wind lifts, and meet your insurance adjuster on site. Beware of out-of-state 'storm chaser' contractors who appear after a hailstorm offering to handle everything — many disappear before warranties activate. Stick with locally licensed contractors who'll still be in business in 10 years.
Architectural asphalt shingles remain the volume choice in all 7 states (CA, CT, FL, MA, NJ, NY, TX) because they offer the best dollar-per-year-of-life for most homes. Metal roofs cost 1.8–2.5× as much installed but last 50+ years and qualify for insurance discounts in hail-prone Texas. Tile is dominant in Florida and parts of California for both aesthetics and longevity, but requires structurally rated decking. Synthetic slate splits the difference: real-slate look without the weight penalty. A good contractor will walk you through the math; a bad one will push whatever has the highest margin.
The Home Service Guide connects homeowners with pre-vetted Roofing Contractors Near You — Free Quotes | The Home Service Guide contractors in seven states. Click your state to see state-specific incentives, regulations, top contractors, and average pricing.
Roofing contractors statewide — 20 cities served
Roofing contractors statewide — 22 cities served
Roofing contractors statewide — 20 cities served
Roofing contractors statewide — 20 cities served
Roofing contractors statewide — 20 cities served
Roofing contractors statewide — 20 cities served
Roofing contractors statewide — 19 cities served
Get Roofing Contractors Near You — Free Quotes | The Home Service Guide quotes in any of the cities below — or any nearby city, ZIP code, or county.
Most residential asphalt-shingle roof replacements run $7,500–$15,000 installed, with average around $10,000–$12,000 for a typical 2,000-square-foot home. Premium architectural shingles, complex multi-facet roofs, or steep pitches push pricing toward $18,000–$25,000. Metal roofing runs $15,000–$35,000, and tile $20,000–$45,000. Storm damage claims often cover replacement at no out-of-pocket cost beyond your deductible.
Most residential roofs are torn off and re-installed in one to three days depending on size, complexity, and weather. A 2,000-square-foot single-story ranch usually completes in a single day; a multi-story with dormers, skylights, and valleys can stretch to four or five. Schedule in shoulder seasons (April–May or September–October) for sharper pricing and faster bookings than the peak summer rush.
Hail damage shows as dark circular bruises on shingles, granule loss exposing the asphalt mat, dented metal flashing and gutters, and dings on aluminum window cladding. Don't climb up to look — most reputable roofers offer free hail inspections and will document damage with photos for an insurance claim. If hail hit your area within the last 12 months and your roof is under 15 years old, get an inspection before the claim window closes.
3-tab shingles are single-layer with a flat appearance, rated for 60-mph winds, and warrantied 20–25 years. Architectural (dimensional) shingles are multi-layer with a thicker, shadowed look, rated for 110–130 mph winds, and warrantied 30–50 years. The cost difference is small — usually $500–$1,500 on a full replacement — and the lifespan and curb appeal upgrade is significant. 3-tab is rarely worth it in 2026 except on outbuildings.
Yes — most cities require a roofing permit for full replacements. A licensed contractor pulls the permit and handles the inspection. Beware contractors who suggest skipping permits to save money; unpermitted work creates problems at resale and can void manufacturer warranties. Permit fees are typically $150–$500 and are line-itemed on the quote.
If your gutters are 15+ years old, showing rust or sagging, or undersized for your roof area, replacing during the roof job saves significant money — the contractor is already on site with the right equipment. Plan to budget $800–$2,500 for full gutter replacement on a typical home. Skip this and you'll likely pay 20–30% more for a standalone gutter project later.